|
1. The “Deperdussin Monocoupe Racer” will be shipping
soon. This is a small plane so we are doing it in 1/3 scale. It
is a beautiful plane and was a successful racer in it’s time.
2.
We are still working
on the Junkers CL1. We ran into a problem with our tool
that is used to make the corrugated panels. Hopefully, we will
get this problem resolved and will be able to finish the
project. Currently, it is all framed up and one wing is
partially covered. This is where we ran into trouble, the
corrugations would not match up on both halves of the wing due
to stretching of the aluminum skin by the corrugating tool.
3.
The Beech Stagger Wing is in the planning stage.
4.
Three other planes are in the brainstorming stage.
|
Home
